Fluid-structural interaction study of the structural arrangement of a riverine low-draft combat boat for coastal transit conditions

Alvarado, D. Flores, E. Paipa, E .:Design and validation by the method of finite elements for the structure of a low draft combat boat. Ship Science and Technology, vol. 15, nº 29, pp. 21-35, (2021). https://doi.org/10.25043/19098642.218

ABS, Rules for building and classing. High-Speed craft. Part 3: Hull Construction and Equipment, Houston, TX. USA: ABS, (2020).

International Organization for Standarization, Small Craft - Hull construction and Scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determinaion, ISO, (2014).

Det Norske Veritas Germanischer Lloyd's DNV-GL, DNV-GL-CG-027- Class Guideline- Finite Element Analysis, (2015).

Yong, B , Wei- Liang. J.:Chapter 8: Ship Hull Scantling Design by Analysis. Marine structural design, pp. 171-180, (2016). https://doi.org/10.1016/B978-0-08-099997-5.00009-5

Liu, B., Wang, S.Villavicencio, R. Guedes Soares, C.: Slamming load and hydroelastic structural reponse og bow flare areas of aluminium fast displacement crafts, Ocean Engineering,( 2020). https://doi.org/10.1016/j.oceaneng.2020.108207

COTECMAR. Cálculos de Escantillonado del Bote de Combate Fluvial de Bajo Calado - BCFBC. Cartagena de Indias, (2020).

Anyfantis, K. «Ultimate strength of stiffened panels subjected to non-uniform thrust,» International Journal of Naval Architecture and Ocean Engineering, vol. 12, pp. 325-342, (2020). https://doi.org/10.1016/j.ijnaoe.2020.03.003

Tupper, E., Introduction to Naval Architecture, Butterworth-Heinemann, (2015).

Lloyd,a.: Seakeeping: Ship behaviour in rough weater, (1998).

Grant.E, Metcalfe,A.: Spectral Analysis in Engineering, Butterworth-Heinemann, (1995).

American Bureau of Shipping, Guidance notes on Structural Direct Analysis for High-Speed Craft, Houston: ABS, (2018).

Lloyd's Register, Rules for the manufacture, testing and certifications of materials, London: Lloyd's Register Group, (2020).

Lloyd's Register, Rules and regulations for the classification of special service craft, London, July (2020).

Liu, B. Villavicencio, R. Soares, G.: On the failure criterion of aluminum and steel plates subjected to low-velocity impact by a spherical indenter. International Journal of Mechanical Sciences, vol. 80, pp. 1-15, (2014). https://doi.org/10.1016/j.ijmecsci.2013.12.015

Nieme, E. Frikle, W. y Maddox, S.: Structural Hot- spot Stress Determination Using Finite Element Analysis. Structural Hot-Spot Stress Approach to Fatigue Analysis of Welded Components, IIW Collection, (2018). https://doi.org/10.1007/978-981-10-5568-3