Diseño y validación por el método de elementos finitos de la estructura de un bote de bajo calado para reconocimiento fluvial

F. Alvarez y M. L. Medina, Guerra Fluvial Irregular: Fuerzas de Combate en los Rios de América, Madrid: IDS. Navantia, 2012.

COTECMAR, «BCFBC. Manual de Usario,» Cartagena de Indias, 2020.

A. B. o. S. ABS, Rules for building and classing. High-Speed craft. Part 3: Hull Construction and Equipment, Houston, TX. USA: ABS, 2020.

International Organization for Standarization, Small Craft - Hull construction and Scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determinaion, ISO, 2014.

Det Norske Veritas Germanischer Lloyd ́s DNV-GL, DNV-GL-CG-027- Class Guideline- Finite Element Analysis, 2015.

B. Yong y J. Wei-Liang , «Chapter 8 - Scantling of Ship's Hulls by Rule,» de Marine Structural Design , Butterworth-Heinemann, 2016, pp. 153-170. https://doi.org/10.1016/B978-0-08-099997-5.00008-3

K. Anyfantis, «Ultimate strength of stiffened panels subjected to non-uniform thrust,» International Journal of Naval Architecture and Ocean Engineering, vol. 12, pp. 325-342, 2020. https://doi.org/10.1016/j.ijnaoe.2020.03.003

D. Van Tuyen , B. Liu, Y. Garbatov, W. Wu y C. Guedes Soares, «Strength assessment of aluminium and steel stiffened panels with openings on longitudinal girders,» Ocean Engineering, vol. 200, 2020. https://doi.org/10.1016/j.oceaneng.2020.107047

J. K. Paik, «Characteristics of welding induced initial deflections in welded aluminum plates,» Thin-walled Structures, vol. 45, pp. 493-501, 2007. https://doi.org/10.1016/j.tws.2007.04.009

Ship Structure Committe, SSC-218 Design Considerations for Alluminum Hull Structures, Washington D.C: Ship Structure Committe, 1971.

R. Sielski, «Research needs in aluminum structure,» Ships and Offshore Structures, vol. 3, pp. 57-65, 2008. https://doi.org/10.1080/17445300701797111

N. Nazemi, F. Ghrib y J. Sokolowski, «The HAZ in Aluminum Welding Revisited,» 3rd Specialty Conference on Engineering Mechanics and Materials, 2013.

J. Paik, J. Lee, M. Ryu, Y. Jang, H. Renaud y P. Hess, «Mechanical buckling collapse testing on Aluminium stiffened plate structures for marine applications,» the World Maritime Technology Conference, 2006.

M. Collette, «Strength and Reliability of Aluminium Stiffened Panels,» Ph.D submission School of Marine Science and Technology, Faculty of Science, Agriculture and Engineering, University of Newcastle, 2005.

B. Chen y C. Guedes Soares, «A Simplified Model for the Effect of Weld-Induced Residual Stresses on the Axial Ultimate Strength of Stiffened Plates,» Journal of Marine Science and Application, vol. 17, pp. 57-67, 2018. https://doi.org/10.1007/s11804-018-0007-7

P. Herrington y R. Latorre, «Development of an aluminum hull panel for high-speed craft,» Marine Structures, vol. 11, pp. 41-71, 1998. https://doi.org/10.1016/S0951-8339(97)00008-7

B. Liu, R. Villavicencio y G. S. Soares, «On the failure criterion of aluminum and steel plates subjected to low-velocity impact by a spherical indenter,» International Journal of Mechanical Sciences, vol. 80, pp. 1-15, 2014. https://doi.org/10.1016/j.ijmecsci.2013.12.015

B. Liu, S. Wang, R. Villavicencio y C. Guedes Soares, «Slamming load and hydroelastic structural reponse og bow flare areas of aluminium fast displacement crafts,» Ocean Engineering, 2020. https://doi.org/10.1016/j.oceaneng.2020.108207

B. Yong y J. Wei- Liang, «Chapter 8: Ship Hull Scantling Design by Analysis,» de Marine structural design, 2016, pp. 171-180. https://doi.org/10.1016/B978-0-08-099997-5.00009-5

American Bureau of Shipping, Guidance notes on Structural Direct Analysis for High-Speed Craft, Houston: ABS, 2018.

Lloyd ́s Register, Rules for the manufacture, testing and certifications of materials, London: Lloyd's Register Group, July 2020.

COTECMAR, «Cálculos de Escantillonado del Bote de Combate Fluvial de Bajo Calado - BCFBC,» Cartagena de Indias, 2020.

E. Nieme, W. Frikle y S. Maddox, «Structural Hot- spot Stress Determination Using Finite Element Analysis,» de Structural Hot-Spot Stress Approach to Fatigue Analysis of Welded Components, IIW Collection, 2018. https://doi.org/10.1007/978-981-10-5568-3

Lloyd ́s Register, Rules and regulations for the classification of special service craft, London, July 2020.